The Invisa Signature Point Source is intended for use as a main front left, right or center channel loudspeaker, as well as a side or rear surround, in high quality multi-channel home theater and music systems, as well as in simpler two channel systems of the highest quality. It presents a compact 28-3/16” x 8-9/16” fascia, and, of course, is of a proper depth (3-1/4” without optional backbox, 3-3/4” with) to allow it to easily fit, into a standard wall depth. Each Invisa SPS incorporates four 5-1/4” high-definition cast basket drivers, which are very similar to those found in the award-winning Triton Reference. The Invisa SPS also incorporates an extraordinary Triton Reference High-Gauss, High Velocity Folded Ribbon Tweeter. The complex crossover network utilizes the special fully balanced topology incorporated in our upper range models, with a special polystyrene film capacitor on the high frequency section. The drivers are wired with special wire which has a unique twist that was engineered for highest performance.
The four 5-1/4” drivers are not identical, nor do they cover the same frequency range. In order to achieve a point source radiation pattern, with the dramatic benefits of better dispersion and improved imaging, the outer two drivers have their upper range limited to 500 Hz., while the two inner 5-1/4” drivers go all the way up to 3 kHz in order to meet and blend perfectly with the tweeter. All this is precisely accomplished by the complex balanced crossover network. Other small, but important details include: a switch to allow adjustment of the tweeter level, a magnetically attached low profile grille, non-resonant mineral-filled frame structure, special dogs to allow easy and secure attachment to the wall, and a rotatable tweeter to allow for correct orientation of the tweeter for vertical or horizontal positioning. There is a unique optional backbox available, that has been engineered with special EVA damping foam internally and open-cell foam externally to prevent bleed though of sound into the adjacent room.
NOTE: PRICE LISTED IS FOR ONE.
|
Invisa Series Specifications:
| |
|
INVISA SPS
|
|
INVISA HTR 7000
|
|
INVISA MPX
|
Speaker
Dimensions |
|
27-9/16" (70 cm) H x 7-15/16" (20.2 cm) W
x 3-1/4" (8.25 cm) D
With Optional Back Box 3-3/4" (9.5 cm) |
|
10˝ (26.9cm) diameter
x 5˝ (12.6 cm) depth
|
|
13-7/8˝ (35.4 cm) H
x 7-1/4˝ (18.4 cm)W
x 3-3/4˝ (9.5 cm) depth
|
Square Grille
Dimensions
|
|
28-5/16" (71.59 cm) H x 8-9/16" (21.74 cm) W |
|
10-9/16˝ (26.82 cm)
x 10-9/16˝ (26.82 cm)
|
|
14-1/2˝(36.83 cm) H
x 7-3/4˝ (19.68 cm) W |
Round Grille
Dimensions
|
|
n/a |
|
10-9/16˝ (26.82 cm)
diameter |
|
n/a |
| Cutout |
|
26-9/16" (67.43 cm) x 7-3/16" (18.25 cm) |
|
9˝ (22.9 cm) diameter |
|
12-3/4˝ (32.4 cm) H
x 6-1/4˝ (19.9 cm) W
|
| Weight |
|
Product: 14 lbs (6.4 kg) /
Shipping: 17 lbs (7.7 kg) |
|
Product: 4.5 lbs (2 kg) /
Shipping: 6.5 lbs (2.9 kg)
|
|
Product: 6 lbs (2.7 kg) /
Shipping: 10 lbs (4.5 kg) |
Frequency
Response
|
|
25 Hz – 35 kHz |
|
25 Hz - 35 kHz |
|
25 Hz - 35 kHz |
| Efficiency |
|
92 dB
|
|
90 dB |
|
90 dB |
Nominal
Impedance
|
|
Compatible with 8 ohms |
|
Compatible with
8 ohms |
|
Compatible with
8 ohms |
Driver
Complement |
|
Two 5.25" (13.33 cm) high-definition cast-basket MVPP™ mid/bass drivers
Two 5.25" (13.33 cm) high-definition cast-basket lower mid/bass drivers
One High-Gauss HVFR™ High Velocity Folded Ribbon tweeter
|
|
One - 7˝ (17.78 cm) High-Def.
Cast-Basket MVPP™
Mid/Bass Driver
One - HVFR™ High-Velocity Folded RibbonTweeter |
|
Two - 4-1/2˝ (11.43)
High-Definition
Cast-Basket MVPP™ Mid/Bass Drivers
One - HVFR™ High-Velocity Folded Ribbon Tweeter |
Recommended
Amplification |
|
20 - 350 watt/channel
|
|
10 - 250 watt/channel |
|
10 - 250 watt/channel |
|
| |
|
|
G
