The HYPSOS DUAL Output is due in early July. Please pre-order. Thank you.
All Ferrum Products Are In Stock.
This power supply is SUPERB with any product requiring a high quality Linear Power Supply. Infinitely adjustable from 5v to 30v with presets as well for MANY products. We have the Splitter (to power 2 products) as well as 2.1mm and 2.5mm DC cables in stock
Please give us a call with any questions.
The new Ferrum Audio HYPSOS defines a brand new category of hi-fi product. It’s not a simple power supply but an audio component of its own; an equally (or even more) important part of a setup as any other. HYPSOS offers a selection of unique features and even accounts for future software improvements as the device is software controlled with as few hardware-dependent elements as possible.
Features:
-
Hybrid design. Linear/switching hybrid design to get the advantages from both techniques, low ripple and noise as well as fast transient response and high efficiency
-
Adjustable. Wide continuous output voltage range of 5-30 V and up to 6 A.
-
Sweet Spot Tuning (SST). Fine-tune the output voltage for the best sound. The voltage level can be safely adjusted on the fly to allow easy comparison testing.
-
4T Sensing Design (4TSD). Ensuring the exact voltage level precisely at the point of the powered device DC input terminal. The special cable design with feedback ensures flat voltage at every moment. This technique eliminates the harmful effects of the cable's resistance effectively improving transient response.
-
Advanced automation. Compatibility with Apple TV remote, Trigger in/out connector; possibility to automate power-up of the devices with standby mode even without dedicated trigger connection.
-
Safe. Automatic Transformer Voltage Adjust (ATVA), Electronic Output Voltage Polarity Switch and overvoltage, current limit and short protection. Settings lock to prevent accidental change of the parameters.
Make your current audio setup perform to its potential. Tweak the sound by modifying the voltage level on the fly and use the preferred combination of the 4-Terminal Sensing and Spread Spectrum Mode settings.
PLEASE NOTE: The power splitter, power link cable, 5×2.5 mm DC plug cable, and 5×2.1 mm cables can ONLY be purchased with the HYPSOS and CANNOT be purchased separately.
Please contact us to add additional cables, including the USB cable, or for ANY CUSTOM LENGTH ADDITIONS OR SUBSTITUTIONS. Please do not hesitate in calling with any questions.
PLEASE NOTE: The Power Splitter includes a 50cm cable as well.
Specifications Hypsos SINGLE Output:
-
Power input: 110-120 & 220-240V AC/50-60Hz (EU/US Version)
90 – 110Vac/50-60Hz (JP Version)IEC C14 power inlet, a fuse holder with power on/off switch plus two-stage EMI filter for low impedance load with better noise attenuation in low frequency applications
-
Mains cable: US/EU/UK
-
DC OUT cable: 5×2.5mm DC plug / 5×2.1mm DC plug Custom cables made to order at additional cost
-
Output Voltage Range: 5-30 [V]
-
Max Continuous Output Current (for V_out below 13,3V): 6 [A]
-
Max Continuous Output Current (for V_out higher than 13,3V): l_out= 80[W] / DCout[V]
-
Maximum Impulse Current: 9A
-
Maximum Impulse Power: DC V_out*9A (270W for 30V)
-
Max Continuous Output Power (for V_out below 13,3V): P_out = V_out[V] * 6[A]
-
Max Continuous Output Power (for V_out higher than 13,3V): 80W
-
Dimensions (without knob, feet and connectors) (W x D x H , mm / inches): 217.5 x 206.5 x 50.0 / 8.6 x 8.1 x 2.0
-
Net weight (kg / lb): ~ 2,89 / ~ 6.2
-
Primary winding fuse: IEC 5x20mm, 250V 3.15A,
slown-blown for Japan version / 250V 2A, slown-blown for Europe,
US version
-
Secondary winding fuse: Littefuse 154004T, 4A
-
Power consumption: 230VAC, 50Hz @ 12VDC out/: Idle – 6VA @ 15W load – 30,7VA @ 60W load – 98VA @ 80W load – 133,9VA