0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart
    Total
    Check Out Continue Shopping

    Power Amplifier

    Power Amplifier
    Exposure 3010S2 Stereo Power Amplifier $2,299.00

    3010S2 Stereo Power Amplifier

    Features
    1. 110 watts RMS per channel into 8 Ohms
    2. Ideal for driving difficult speaker loads in bi-amping mode with 3010S2D Integrated Amplifier
    3. High capacity custom-made toroidal power transformer and power supply capacitors
    4. High-quality capacitors used in the signal path
    5. Clean and extended low frequency performance
    6. Full-aluminium casework and extruded front panel to control resonance and stray electro-magnetic fields
    7. Three year guarantee
    8. Available in black or titanium

    Specifications

      • Power Output (Stereo) : 110 Watts per channel at 1KHz into 8 Ohms
      • Input Impedance : 18K Ohms
      • Frequency Response : 20Hz - 20Khz ± 0.5dB
      • Total Harmonic Distortion : <0.015% at rated output, ref. 1KHz
      • Signal to Noise Ratio : >100dB, ref. rated output
      • Channel Separation : >60dB, 20Hz - 20KHz
      • Mains Supply : 110/120V or 220/240V, 50/60Hz (factory set)
      • Power Consumption : <400VA, 8 Ohm load both channels driven
      • Dimensions - H x W x D : 115mm x 440mm x 300mm
      • Nett Weight (unpacked) : 12kg
      • G
    Exposure 3010S2 Mono Block Power Amplifiers $3,699.00

    3010S2 Mono Power Amplifier Pair

    Features
    1. Large custom made toroidal transformer and smoothing capacitors for power supply
    2. All bipolar transistor design using carefully selected parts
    3. DC coupled throughout
    4. Electronic, non-invasive overload protection circuit and thermal trip
    5. Bi-wire speaker outputs using high quality shrouded sockets
    6. High quality all aluminium case work
    7. Three year guarantee
    8. Available in black or titanium

    Specifications

      • Power Output : 100 Watts per channel, 8 Ohms
      • Input Impedance : 50K Ohms at 1KHz
      • Frequency Response : -3dB at 60KHz, ref. 1KHz
      • Total Harmonic Distortion : <0.01% at rated power, 1KHz
      • Signal to Noise ratio : >110dB, A weighted, ref. rated output
      • Power Consumption : <400VA, 8 Ohm load
      • Mains Supply : 110/120V or 220/240V, 50/60Hz (factory set)
      • Dimensions - H x W x D : 115mm x 440mm x 300mm
      • Nett Weight (unpacked) : 12kg
      • Gross Weight (packed) : 14kg
    Exposure 2010S2 Stereo Power Amplifier $1,399.00

    2010S2 Power Amplifier

    Features
    1. High capacity 200VA custom-made toroidal power transformer and supply capacitors
    2. All-aluminium casework and extruded front panel to control resonance and stray electro-magnetic fields
    3. High quality capacitors used in the signal path
    4. Very clean and extended low frequency performance
    5. Bi-wiring compatible
    6. 75 watts per channel into 8 Ohms
    7. Three year guarantee
    8. Available in black or titanium

    Specifications

      • Power Output (Stereo) : 75 Watts per channel at 1KHz into 8 Ohms
      • Input Sensitivity : 1V, gain + 24dB
      • Input Impedance : >18K Ohms
      • Frequency Response : 20Hz - 20Khz ± 0.5dB
      • Total Harmonic Distortion : <0.02% at 1KHz, rated power
      • Signal to Noise : >110dB, A weighted, ref. rated output
      • Channel Separation : >80dB, 20Hz - 20KHz
      • Mains Supply : 110/120V or 220/240V, 50/60Hz (factory set)
      • Power Consumption : <250VA, both channels driven, 8 Ohms load
      • Dimensions - H x W x D : 90mm x 440mm x 310mm
      • Nett Weight (unpacked) : 7kg
      • Gross Weight (packed) : 9kg 
    Primaluna Dialogue Premium HP Tube Power Amplifier $5,199.00

    POINT TO POINT WIRING

    You spend a lot of money on interconnects. So why have the signal go right from the RCA jacks or speaker terminals into circuit boards with copper traces so thin you can hardly see them? What’s high-end about that?

    PrimaLuna employs Point to Point Wiring on all products. The DiaLogue Premium even uses Swiss-made silver-plated OFC wire. The entire signal path, including resistors and capacitors, is painstakingly hand wired with heavy-gauge cable by craftsman.

    DUAL-MONO DESIGN

    Expensive and exotic preamps always use a dual-mono design to achieve a level of imaging not possible otherwise. Most manufacturers don’t employ dual-mono because of expense. It requires two power transformers, double regulation circuits, and in fact….everything is double. In effect, dual-mono means building two discrete and separate preamps into one box. It is so expensive to build, it’s a rarity even at the highest price points. All PrimaLuna preamps are dual-mono for the ultimate in stereo imaging and a sense of space that goes on forever.  

    BAD TUBE INDICATOR

    PrimaLuna engineers wanted to make owning a tube amp so simple you would have no excuse not to have your tube dreams come true.

    If a tube fails, Adaptive AutoBias will instantly put the amplifier into protection mode so no parts can get damaged. A red LED will light up in front of the tube that needs replacing. Simply plug in another tube, and listen. No guessworkNo smoking ampNo getting out the soldering iron or dropping your amp off at UPS

    ADAPTIVE AUTOBIAS

    What most companies call Auto Bias is actually "Cathode Bias"- A commonly used method that is cheap to make, and often found in guitar amps, but also $20,000 high end audio amps. It reduces the available power of the amp and runs the tubes hard, meaning shorter tube life and failures via "shorts".

    PrimaLuna's Adaptive AutoBias is a true, smart technology employing an array of sensors to monitor tubes and make adjustments seamlessly in real time. More important, it is the ONLY circuit of its kind that is truly "adaptive" by addressing "tube pinch off" at higher volumes, therefore reducing distortion by over 50% and greatly extending tube life. Adaptive AutoBias is completely passive and NOT in the signal path. The result is low to no maintenance, long tube life, and the lowest possible distortion for amazing sound.

    Adaptive AutoBias also provides unparalleled flexibility by allowing use of almost any tube on the market today. It even has a fine-tuning switch for EL-34 and KT88/KT120/KT150 tube types.

    AC OFFSET KILLER - A PRIMALUNA EXCLUSIVE

    DiaLogue Premium is about goose bumps. The ones you get when music comes out of a background so quiet, you may say to yourself “Just how is this possible?” PrimaLuna custom-winds our own massive toroidal power transformers that are low in hum and EMI. But we wanted more. Our engineers designed the AC Offset Killer to lower transformer noise to a place no other manufacturer dreams of going, regardless of how bad your electricity is. The result? Sense of space. Texture. The resonance of an acoustic guitar or violin string that seems to trail on forever. The AC Offset Killer will amaze you. 

    PLEASE NOTE: CONVERTIBLE FROM STEREO TO MONOBLOCK OPERATION VIA BACK PANEL SWITCH. PLEASE ORDER 2 IF MONOBLOCK OPTION IS PREFERRED.

    Output Power:
    Stereo
    Ultra-linear
    (8 Ohms, 1% THD)
    Output Power:
    Stereo
    Triode
    (8 Ohms, 1% THD)
    Output Power:
    Mono
    Ultra-linear
    (8 Ohms, 1% THD)
    Output Power:
    Mono
    Triode
    (8 Ohms, 1% THD)
    Inputs
    Outputs
    Freq. Response (+/- 1dB)
    THD (1W/1kHz)
    S/N Ratio
    Input Sensitivity
    Input Impedance
    Power Consumption
    Standard Tube Compliment
    Dimensions (WxHxD)
    Weight
    Primaluna Dialogue Premium Tube Power Amplifier $4,199.00

    POINT TO POINT WIRING

    You spend a lot of money on interconnects. So why have the signal go right from the RCA jacks or speaker terminals into circuit boards with copper traces so thin you can hardly see them? What’s high-end about that?

    PrimaLuna employs Point to Point Wiring on all products. The DiaLogue Premium even uses Swiss-made silver-plated OFC wire. The entire signal path, including resistors and capacitors, is painstakingly hand wired with heavy-gauge cable by craftsman.

    DUAL-MONO DESIGN

    Expensive and exotic preamps always use a dual-mono design to achieve a level of imaging not possible otherwise. Most manufacturers don’t employ dual-mono because of expense. It requires two power transformers, double regulation circuits, and in fact….everything is double. In effect, dual-mono means building two discrete and separate preamps into one box. It is so expensive to build, it’s a rarity even at the highest price points. All PrimaLuna preamps are dual-mono for the ultimate in stereo imaging and a sense of space that goes on forever.  

    BAD TUBE INDICATOR

    PrimaLuna engineers wanted to make owning a tube amp so simple you would have no excuse not to have your tube dreams come true.

    If a tube fails, Adaptive AutoBias will instantly put the amplifier into protection mode so no parts can get damaged. A red LED will light up in front of the tube that needs replacing. Simply plug in another tube, and listen. No guessworkNo smoking ampNo getting out the soldering iron or dropping your amp off at UPS

    ADAPTIVE AUTOBIAS

    What most companies call Auto Bias is actually "Cathode Bias"- A commonly used method that is cheap to make, and often found in guitar amps, but also $20,000 high end audio amps. It reduces the available power of the amp and runs the tubes hard, meaning shorter tube life and failures via "shorts".

    PrimaLuna's Adaptive AutoBias is a true, smart technology employing an array of sensors to monitor tubes and make adjustments seamlessly in real time. More important, it is the ONLY circuit of its kind that is truly "adaptive" by addressing "tube pinch off" at higher volumes, therefore reducing distortion by over 50% and greatly extending tube life. Adaptive AutoBias is completely passive and NOT in the signal path. The result is low to no maintenance, long tube life, and the lowest possible distortion for amazing sound.

    Adaptive AutoBias also provides unparalleled flexibility by allowing use of almost any tube on the market today. It even has a fine-tuning switch for EL-34 and KT88/KT120/KT150 tube types.

    AC OFFSET KILLER - A PRIMALUNA EXCLUSIVE

    DiaLogue Premium is about goose bumps. The ones you get when music comes out of a background so quiet, you may say to yourself “Just how is this possible?” PrimaLuna custom-winds our own massive toroidal power transformers that are low in hum and EMI. But we wanted more. Our engineers designed the AC Offset Killer to lower transformer noise to a place no other manufacturer dreams of going, regardless of how bad your electricity is. The result? Sense of space. Texture. The resonance of an acoustic guitar or violin string that seems to trail on forever. The AC Offset Killer will amaze you. 

    PLEASE NOTE: CONVERTIBLE FROM STEREO TO MONOBLOCK OPERATION VIA BACK PANEL SWITCH. PLEASE ORDER 2 IF MONOBLOCK OPTION IS PREFERRED.

    Output Power:
    Stereo
    Ultra-linear
    (8 Ohms, 1% THD)
    Output Power:
    Stereo
    Triode
    (8 Ohms, 1% THD)
    Output Power:
    Mono
    Ultra-linear
    (8 Ohms, 1% THD)
    Output Power:
    Mono
    Triode
    (8 Ohms, 1% THD)
    Inputs
    Outputs
    Freq. Response (+/- 1dB)
    THD (1W/1kHz)
    S/N Ratio
    Input Sensitivity
    Input Impedance
    Power Consumption
    Standard Tube Compliment
    Dimensions (WxHxD)
    Weight
    Primaluna Prologue Premium Tube Power Amplifier $2,899.00

    POINT TO POINT WIRING

    You spend a lot of money on interconnects. So why have the signal go right from the RCA jacks or speaker terminals into circuit boards with copper traces so thin you can hardly see them? What’s high-end about that?

    PrimaLuna employs Point to Point Wiring on all products. The DiaLogue Premium even uses Swiss-made silver-plated OFC wire. The entire signal path, including resistors and capacitors, is painstakingly hand wired with heavy-gauge cable by craftsman.

    DUAL-MONO DESIGN

    Expensive and exotic preamps always use a dual-mono design to achieve a level of imaging not possible otherwise. Most manufacturers don’t employ dual-mono because of expense. It requires two power transformers, double regulation circuits, and in fact….everything is double. In effect, dual-mono means building two discrete and separate preamps into one box. It is so expensive to build, it’s a rarity even at the highest price points. All PrimaLuna preamps are dual-mono for the ultimate in stereo imaging and a sense of space that goes on forever.  

    BAD TUBE INDICATOR

    PrimaLuna engineers wanted to make owning a tube amp so simple you would have no excuse not to have your tube dreams come true.

    If a tube fails, Adaptive AutoBias will instantly put the amplifier into protection mode so no parts can get damaged. A red LED will light up in front of the tube that needs replacing. Simply plug in another tube, and listen. No guessworkNo smoking ampNo getting out the soldering iron or dropping your amp off at UPS

    ADAPTIVE AUTOBIAS

    What most companies call Auto Bias is actually "Cathode Bias"- A commonly used method that is cheap to make, and often found in guitar amps, but also $20,000 high end audio amps. It reduces the available power of the amp and runs the tubes hard, meaning shorter tube life and failures via "shorts".

    PrimaLuna's Adaptive AutoBias is a true, smart technology employing an array of sensors to monitor tubes and make adjustments seamlessly in real time. More important, it is the ONLY circuit of its kind that is truly "adaptive" by addressing "tube pinch off" at higher volumes, therefore reducing distortion by over 50% and greatly extending tube life. Adaptive AutoBias is completely passive and NOT in the signal path. The result is low to no maintenance, long tube life, and the lowest possible distortion for amazing sound.

    Adaptive AutoBias also provides unparalleled flexibility by allowing use of almost any tube on the market today. It even has a fine-tuning switch for EL-34 and KT88/KT120/KT150 tube types.

    AC OFFSET KILLER - A PRIMALUNA EXCLUSIVE

    DiaLogue Premium is about goose bumps. The ones you get when music comes out of a background so quiet, you may say to yourself “Just how is this possible?” PrimaLuna custom-winds our own massive toroidal power transformers that are low in hum and EMI. But we wanted more. Our engineers designed the AC Offset Killer to lower transformer noise to a place no other manufacturer dreams of going, regardless of how bad your electricity is. The result? Sense of space. Texture. The resonance of an acoustic guitar or violin string that seems to trail on forever. The AC Offset Killer will amaze you. 

    PLEASE NOTE: CONVERTIBLE FROM STEREO TO MONOBLOCK OPERATION VIA BACK PANEL SWITCH. PLEASE ORDER 2 IF MONOBLOCK OPTION IS PREFERRED.

     

    Output Power
    Stereo
    (8 Ohms, 1% THD)
    Output Power
    Mono
    (8 Ohms, 1% THD)
    Inputs
    Outputs
    THD
    Freq. Response
    S/N Ratio
    Input Sensitivity
    Input Impedance
    Power Consumption
    Standard Tube Compliment
    Dimensions (WxHxD)
    Weight
    Lyngdorf SDA 2400 Power Amplifier $2,999.00

    The versatile SDA-2400 digital stereo power amplifier features both analog and digital inputs and optional rack mounts, as well as a range of novel features to deliver outstanding performance in a wide range of applications.

    he SDA-2400 includes both optical and coaxial digital inputs in addition to the traditional balanced and single-ended analog inputs in order to fit any possible setup.

    This power amplifier can function in a traditional stereo or multichannel setup—but also as a powerful addition to single standing media players and streaming devices with integrated volume control. Using the digital connections, there will be no interference or noise from external sources.

    The inputs are based upon the Wolfson WM8804 PLL Transceiver for excellent dynamic performance and improved tolerance to clock jitter.

    Lyngdorf is the pioneer in digital amplifiers, and the SDA-2400 power amplifier is not your typical Class D digital power amplifier. It’s better. It has very low and linear distortion and an impressive signal-to-noise ratio, making it the perfect choice for those seeking the purest sounding high-power amplifier on the market.

    The output stage uses Pulse Width Modulation with a patented switch speed optimization technology. Together with a fixed switching speed of 390 kHz and minimal feedback control, this ensures low and linear distortion compared to typical Class D amplifiers.